Dimensions Width 6.3 cm, length 6.3 cm, height 7 cm (based on the finished candle)
Material Polycarbonate plastic
Amount of wax required About 400 grams
Maximum fragrance percentage About 10%
Wax core Smokeless wax wick No. 4, white cotton wax wick. 4
Notes
- Reuse it multiple times This is a permanent plastic mold that does this.
- Do not use a hot air blower when cleaning the mold or removing wax as this may cause the mold to warp.
- The first time you use the mold, it is easy to release the wax from the mold using a release agent.

PC square moldHeavy weight and high utilization rate

It is a hexahedral square mold.
It is a mold that can be placed anywhere as an object, often used to create products for sale in classes.

It is a mold that can be produced and combined in various ways using a wide and flat side.

Candleworks produces directly in Korea and improves quality!
This mold is a product designed and manufactured by Candleworks.
Unauthorized copying is absolutely prohibited. Any violation may result in legal liability.

Point 1. Product composition

PC cube mold, 6.3cm wide, 6.3cm long, 7cm high (based on the finished candle).
A permanent plastic mold made of polycarbonate plastic that can be reused multiple times.
It takes approximately 400 grams of wax to make a candle.

Point 2. Thick and simple design

The stable size and moderate volume create a heavy and simple atmosphere.
It can create neat styling beauty, and the sides can be decorated by making ice candles, transfer paper or embossing.

Point 3. Homemade products

With Candleworks' unique sensibility and design.
Made in Korea, high-quality molds are directly manufactured with precise and sophisticated technology.
The Candleworks wordmark is engraved on the edge of the mold or near the upper portion of the wax core line, so please be aware of the repeats!
This product is a mold directly designed and manufactured by Candleworks. Unauthorized copying is strictly prohibited. If violated, you may be held legally responsible.

Point 4. Size comparison

You can compare the sizes of similar dome pillar candles based on the longest tapered mold.

PC cube mold (6.3x7cm)

Size	Diameter 6.3 cm x Height 7 cm
Material	Polycarbonate plastic
Amount of wax required	About 400 grams
Maximum fragrance load	About 10%
Recommended wax core	No. 4 smokeless wax wick, No. 4 white cotton wax wick
Product Features	- Permanent plastic mold that can be reused multiple times. - Do not use a hot air blower when cleaning the mold or removing wax as this may cause the mold to warp. - The first time the mold is used, the wax can be easily released from the mold using a release agent.

How to use PC mold

Production 1. Insert the wax core and block the entrance with the mold sealer

After inserting the wax wick into the wax wick hole, cover the wax wick hole with a mold sealer to prevent hot wax from leaking.

2. Spray release agent

Secure the wax core and spray release agent inside the mold. The release agent creates a thin lubricating film that helps the candle separate well from the mold.

Production 3. Melt wax

Melt wax according to mold size and capacity.

Production 4. Coloring

Use fat-soluble liquid dyes, color blocks, and pigment chips to create the desired color for your application.

Preparation 5. Mix sesame oil

Although the temperature varies depending on the wax, add the sesame oil between 80-85 degrees and stir evenly for about 1 minute.

Production 6. Wax pouring

Based on the wax used for the column, pour the wax into the mold at a temperature of about 75~85℃.

Production 7. Fixed wax core

Using the wax wick clamp, gently pull on the wax wick and secure it in the center of the mold.

Production 8. Secondary pouring

When the surface of the wax hardens to a certain extent, pierce the wax core with a glass rod, etc., and pour the remaining wax into the blank space for the second time.

9. Remove the mold sealer

After the wax has completely hardened, remove the mold sealer before demoulding.

Production 10. Demold

After confirming that the mold has cooled, gently press the sides of the mold with your hands to create an air gap in the smaller shrinkage part. Remove the candle from the mold and clean the wax wick.