CW - #1 PC Dome Pillar Mold 錐頂柱體模具 (4x15cm)
CW - #1 PC Dome Pillar Mold 錐頂柱體模具 (4x15cm)
Regular price
MOP$86.00
Regular price
Sale price
MOP$86.00
Unit price
per
Shipping calculated at checkout.
In stock
Unable to load pickup service availability
Dimensions Diameter 4 cm x height 15 cm (finished candle size)
Material Polycarbonate plastic
Amount of wax required 140g
Maximum fragrance load percentage Approximately 10% wax
Wax core Smokeless wax Core #1, white cotton wax core #1
Notes
- Permanent plastic mold that can be reused multiple times.
- Do not use a hot air heater or heat gun when cleaning the mold/removing wax as this may cause the mold to warp.
- It is recommended to use mold release spray to easily remove the candle from the mold.
Basic standards for pillars!
PC dome column mold (4x15cm)
The most popular basic design pillar mold .
A permanent polycarbonate plastic mold most widely used in candle making classes and sales .
Since the mold is clear, it is easy to check the color, and various types of waxes can be used, such as soy, palm, or paraffin .
This mold is a product designed and manufactured by Candleworks.
Reprinting without permission is prohibited. If there is any infringement, legal liability may be pursued.
Key points 1. Composition
Cone top cylinder mold. 4 cm in diameter and 15 cm in height (finished candle size)
Permanent mold made of polycarbonate plastic that can be reused multiple times .
It takes 140 grams of wax to make 1 candle.
Key Points 2. Basic Circus Dome Design
The wax core portion has a sleek and soft design that is reminiscent of a circus dome rather than a bell shape.
The most popular type of pillar candle that is recognized as the standard.
Be sure to seal the wax core hole with a mold sealer before pouring the wax.
Key Point 3. Made by Candleworks
The Candleworks logo or wordmark is printed on top of the mold frame or near the wax core line.
The product is designed by Candleworks. Plagiarism of the mold is strictly prohibited. Any violation of unauthorized copying will result in prosecution.
Point 4. Compare sizes
Reference photo showing dimensional differences between dome column molds.
PC cone top cylinder mold (4x15cm)
| Size | Diameter 4cm x Height 15cm |
|---|---|
| Materials | Polycarbonate plastic |
| Wax required | 140g |
| Maximum fragrance load | About 10% wax |
| Recommended wax core | Smokeless wax wick #1, white cotton wax wick #1 |
| Features |
- Permanent plastic molds that can be reused multiple times . |
How to use PC mold
Production 1. Insert the wax core
Use mold sealer to plug hole
To prevent leakage after inserting the wax wick into the hole, use a mold sealer to plug the wax wick hole .
Production 2. Spray release sprayer
Secure the wax wick and spray the inside of the mold with release spray. Mold release spray creates a thin, oily coating that helps the candle separate smoothly from the mold.
Production 3. Melting wax
Melt the wax according to the mold capacity.
Production 4. Coloring
Use oil-soluble liquid dyes, color blocks or pigment chips to create the desired color for your application.
Production 5. Mix sesame oil
The temperature varies depending on the type of wax, but add the sesame oil at about 80 to 85 degrees and stir evenly for about 1 minute .
Production 6. Pour wax
Based on the column wax, pour the wax into the mold at a temperature of about 75~85 degrees Celsius .
Production 7. Fixed wax core
Using the wax wick clamp, gently pull on the wax wick and secure it in the center of the mold .
Production 8. Second pouring of wax
When the surface of the wax has hardened slightly, prick around the wick and pour the wax into the empty space .
Production 9. Remove mold sealer
Once the wax has completely hardened, remove the mold sealer before removing the candle.
Production 10. Take out the candle
After confirming that the mold is completely cooled, gently press the area where the wax has shrunk. This will help with better removal of the candle. Remove the candle and arrange the wax wick.
