Skip to product information
1 / 5

CW - #3 PC Dome Pillar Mold 錐頂柱體模具 (5x17cm)

CW - #3 PC Dome Pillar Mold 錐頂柱體模具 (5x17cm)

Regular price MOP$102.00
Regular price Sale price MOP$102.00
Sale Sold out
Shipping calculated at checkout.

In stock

Dimensions Diameter 5 cm x height 17 cm (finished candle size, excluding wick coating)
Material Polycarbonate plastic
Required amount of wax 240g
Maximum fragrance load About 10%
Wax core Smokeless wax core #2, white cotton wax core #2

Notes
- Permanent plastic mold that can be reused multiple times.
- Do not use a hot air heater or heat gun when cleaning the mold/removing wax as this may cause the mold to warp.
- It is recommended to use mold release spray to easily remove the candle from the mold.
- Existing product names have been changed based on the total height of the candle.

Basic standards for pillars!
PC dome column mold (5x17cm)

The most popular basic design pillar mold .

A permanent polycarbonate plastic mold most widely used in candle making classes and sales .
Because the mold is clear, it is easy to check the color, and various types of wax can be used, such as soy, palm, or paraffin .

This mold is a product designed and manufactured by Candleworks. Reprinting without permission is prohibited. If there is any infringement, legal liability may be pursued.

身體1

Key Points 1. Composition

PC cone top cylinder mold. 5 cm diameter, 17 cm high (finished candle size)
Permanent mold made of polycarbonate plastic, reusable multiple times .
It takes approximately 240 grams of wax to make 1 candle.



身體1身體1

Key Points 2. Basic Circus Dome Design

The wax core portion has a sleek and soft design that is reminiscent of a circus dome rather than a bell shape.
The most popular type of pillar candle recognized as the standard.
Be sure to seal the wax core hole with a mold sealer before pouring the wax.


身體1

Key Point 3. Made by Candleworks

The Candleworks logo or wordmark is stamped on top of the mold frame or near the wax core line.
The product is designed by Candleworks. Plagiarism of the mold is strictly prohibited. Any violation of unauthorized copying will result in prosecution.


身體1

Point 4. Compare sizes

Reference photo showing dimensional differences between dome column molds.

圖片

PC dome column mold (5x17cm)

Size Diameter. 5cm x height 17cm
Materials Polycarbonate plastic
Wax required About 240 grams
Maximum fragrance load About 10%
Recommended wax core Smokeless wax wick #2, white cotton wax wick #2
Features

- Permanent plastic molds that can be reused multiple times .
- Do not use a hot air heater or heat gun when cleaning the mold/removing wax as this may cause the mold to deform .
- It is recommended to use mold release spray to easily remove the candle from the mold.

How to use PC mold


規格

Production 1. Insert the wax wick &Use the mold sealer to block the hole

To prevent leakage after inserting the wax wick into the hole, use a mold sealer to plug the wax wick hole .

規格

Production 2. Spray release sprayer

Secure the wax wick and spray the inside of the mold with release spray. Mold release spray creates a thin, oily coating that helps the candle separate smoothly from the mold.

規格

Production 3. Melting wax

Melt the wax according to the mold capacity.

規格

Production 4. Coloring

Use oil-soluble liquid dyes, color blocks or pigment chips to create the desired color for your application.

規格

Production 5. Mix sesame oil

The temperature varies depending on the type of wax, but add the sesame oil at about 80 to 85 degrees and stir evenly for about 1 minute .

規格

Production 6. Pour wax

Based on the column wax, pour the wax into the mold at a temperature of about 75~85 degrees Celsius .

規格

Production 7. Fixed wax core

Using the wax wick clamp, gently pull on the wax wick and secure it in the center of the mold .

規格

Production 8. Second pour

When the surface of the wax hardens slightly, prick around the wax core and pour the wax into the empty space .

規格

Production 9. Remove mold sealer

Once the wax has completely hardened, remove the mold sealer before removing the candle.

規格

Production 10. Take out the candle

After confirming that the mold is completely cooled, gently press the area where the wax has shrunk. This will help with better removal of the candle. Remove the candle and arrange the wax wick.


View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)