Dome Head Taper Mold 尖錐頂長柱體模具

Materiel 材質：PC 聚碳酸酯
Color 顏色：As shown in Picture 如圖所示
Mold specifications 模具規格：
2.2 x 10 cm
2.2 x 15 cm
2.2 x 20 cm
2.2 x 25 cm

蠟燭模具機器製造時不免產生與模具的接駁位，外圍邊一處位置會產生不完滑，如上圖。接駁位在模具外圍一處，並不會內面影響製作蠟燭使用，介意請清楚考慮選購。

The candle mold is manufactured by candle mold factories, inevitably it might produce a mark or a spot, which was to connect to the machine. The mark be at the outer edge of the mold, as shown in the figure above. As the mark is located on the periphery of the mold, and the inner surface will not affect the use of making candles. It is recommended to consider before buying.