Point 2. Silicone base double-layer structure
The structure is divided into two parts: silicone and polycarbonate plastic .
The upper and lower diameters of the cylindrical PC portion are different. When inserting the silicone part, insert the tight part .
※When the PC surface is cooled and the silicone part is a little warm, it is the best time to separate the mold. If the time is too long and the wax has completely hardened, and you want to separate it at this time, the silicone part will shrink and squeeze with the central silicone, making it difficult to separate.
Point 3. Made by Candleworks
The Candleworks logo or wordmark is printed on top of the mold frame or near the wick line .
This product is designed by Candleworks. Plagiarism of the mold is strictly prohibited. Any unauthorized copying will result in legal liability.
Point 4. Compare sizes
Reference photo shows the size difference between the two molds.
PC cylindrical windproof candlestick mold (10cm x14cm)
|
| Size |
Diameter 10m x height 14cm |
| Material |
Silicone, polycarbonate plastic |
| Amount of wax required |
About 480 grams |
| Recommended wax core |
Smokeless wax wick No. 4-5, white cotton wax wick No. 4-5
|
|
(A smaller sized wax wick may be used to prevent damage to the bracket portion.) |
| Product Features |
- This is a permanent plastic mold that can be reused multiple times.
- Do not use a hot air blower when cleaning the mold or removing wax as this may cause the mold to warp.
- It is recommended to use a release agent to facilitate easy removal from the mold.
- Since the mold is separated from the top and bottom, a seam is created in the center of the candle. When finished, gently scrape the surface clean with a knife.
|
