CW - No.29 Santa Base Mold 聖誕帽子基礎形狀模具
CW - No.29 Santa Base Mold 聖誕帽子基礎形狀模具
Regular price
HK$65.00
Regular price
HK$65.00
Sale price
HK$65.00
Unit price
per
Shipping calculated at checkout.
In stock
Unable to load pickup service availability
Product Information
Size Diameter about 6.5cm, Height about 5cm (1 hole size )
Material Silicone
Product Features
- 6 pieces Christmas hat basic shape molds.
- Various colors can be produced depending on the color.
- It is recommended to use paraffin 160 or beeswax, mixing beeswax with PB wax in a 1:1 ratio.
- Each piece requires approximately 66.5 grams of wax.
Christmas is here
The size of one is about 6.5 cm in diameter and 5 cm in height. Each one requires about 66.5 grams of wax.
Use fat-soluble liquid dyes to achieve vivid color development, and use paraffin wax to reduce air bubbles on the surface.
* To reduce bubbles during production, it is recommended to gently heat with a hot air blower or heating tool before production.
Made from 100% platinum silicone, allowing the edible product to be identical to the product used in actual baking.
It can be used in the maximum temperature range of 230℃ to -60℃. Dark dyes may stain the mold. Please use it with caution.
Use non-simple wavy lines to create a more natural Christmas hat.
Product Description
Christmas is here
Christmas hat basic shape mold
This is a clean white base.
Use the basic Christmas shape mold to make a red hat, use the
round base mold to make a face, and put on a Santa Claus hat.
The main body can be made using a pudding basic shape mold.
Create a
Christmas atmosphere by combining different base molds!
Use the basic Christmas shape mold to make a red hat, use the
round base mold to make a face, and put on a Santa Claus hat.
The main body can be made using a pudding basic shape mold.
Create a
Christmas atmosphere by combining different base molds!
Point 1. Design
This is a basic Christmas hat shape mold that can be used in a variety of ways.The size of one is about 6.5 cm in diameter and 5 cm in height. Each one requires about 66.5 grams of wax.
Use fat-soluble liquid dyes to achieve vivid color development, and use paraffin wax to reduce air bubbles on the surface.
* To reduce bubbles during production, it is recommended to gently heat with a hot air blower or heating tool before production.
Point 2. Product content
A mold consists of 6 holes.Made from 100% platinum silicone, allowing the edible product to be identical to the product used in actual baking.
It can be used in the maximum temperature range of 230℃ to -60℃. Dark dyes may stain the mold. Please use it with caution.
Point 3. Differences in details
It is a clean white color and it is best to visually check the color of the wax you are working with.Use non-simple wavy lines to create a more natural Christmas hat.
Santa Hat Base Mold
| Size | About 6.5cm in diameter, 5cm in height (1 hole size) |
|---|---|
| Texture | Silicon |
| Product Features |
- 6 piece Santa base mold. - Various colors can be produced depending on the color. - It is recommended to use paraffin 160 or beeswax, mixing beeswax with PB wax in a 1:1 ratio. - Each piece requires approximately 66.5 grams of wax. |
