CW - PC Taper Candle Mold 錐頂長柱體模具 4-Cavities
CW - PC Taper Candle Mold 錐頂長柱體模具 4-Cavities
Regular price
HK$290.00
Regular price
Sale price
HK$290.00
Unit price
per
Shipping calculated at checkout.
In stock
Unable to load pickup service availability
Size Diameter 2.2 cm high 20 cm (finished candle size)
MaterialPolycarbonate plastic
Amount of wax required 60 grams per 1 piece
Maximum fragrance loading percentage Approx. 10%
Recommended wax core Smokeless wax core #1, white cotton wax core #0~1
Notes
- Permanent plastic mold that can be reused multiple times.
- Do not use a hot air heater or heat gun when cleaning the mold/removing wax as this may cause the mold to warp.
- It is recommended to use mold release spray to easily remove the candle from the mold.
Slim and modern
PC cone top long cylinder mold
A tapered candle mold that feels modern with its simple wax wick line and thickness.
Can make 4 candles at a time, 4 holes create a thick and stable feeling.
Because the mold is clear, it is easy to check the color, and various types of wax can be used, such as soy, palm, or paraffin.
This mold is a product designed and manufactured by Candleworks. Reprinting without permission is prohibited. If there is any infringement, legal liability may be pursued.
Key Points 1. Composition
Conical top long cylinder mold. 2.2 cm in diameter and 20 cm in height (finished candle size)
Permanent mold made of polycarbonate plastic that can be reused many times.
It takes approximately 60 grams of wax to make 1 piece.
Point 2. Slim and cute design
The wax wick has an elegant, soft design reminiscent of slender bell-shaped wires.
Be sure to seal the wax core hole with a mold sealer before pouring the wax.
Key Point 3. Made by Candleworks
The clear conical mold made of polycarbonate plastic was Candleworks' first design.
The Candleworks logo or wordmark is printed on top of the mold frame or near the wax core line.
The product is designed by Candleworks. Plagiarism of the mold is strictly prohibited. Any violation of unauthorized reproduction may result in prosecution.
Point 4. Compare sizes
Reference photo showing size difference between 4 hole mold and 6 hole mold.
PC cone top long cylinder mold
| Size | Diameter. 2.2cm x height 20cm |
|---|---|
| Material | Polycarbonate plastic |
| Wax required | 60g per hole |
| Maximum fragrance load | 10% |
| Recommended wax core | Smokeless wax wick #1, white cotton wax wick #0~1 |
| Features |
- Permanent plastic mold that can be reused multiple times. |
How to use PC mold
Production 1. Insert wax wick & Use mold sealer to plug hole
To prevent leakage after inserting the wax wick into the hole, plug the wax wick hole with a mold sealer.
Production 2. Spray release sprayer
Secure the wax wick and spray inside the mold with release spray. Release spray creates a thin, oily coating to help the candle separate smoothly from the mold.
Production 3. Melting wax
Melt wax according to mold capacity.
Production 4. Coloring
Use oil-soluble liquid dyes, color blocks, or pigment chips to create the desired color for your application.
Production 5. Mix sesame oil
The temperature varies depending on the type of wax, but add the sesame oil at about 80 to 85 degrees and stir evenly for about 1 minute.
Production 6. Pour wax
Based on the column wax, pour the wax into the mold at a temperature of about 75~85 degrees Celsius.
Production 7. Fixed wax core
Using the wax wick clamp, gently pull on the wax wick and secure it in the center of the mold.
Production 8. Second pour
When the surface of the wax has hardened slightly, prick around the wick and pour the wax into the empty space.
Production 9. Remove mold sealer
Once the wax has completely hardened, remove the mold sealer before removing the candle.
Production 10. Take out the candle
After confirming that the mold is completely cooled, gently press the area where the wax has shrunk. This will help with better removal of the candle. Remove the candle and arrange the wax wick.
