CW - PC Small Sphere Mold 小球模具
CW - PC Small Sphere Mold 小球模具
Regular price
HK$85.00
Regular price
Sale price
HK$85.00
Unit price
per
Shipping calculated at checkout.
In stock
Unable to load pickup service availability
Dimensions Diameter 6.5 cm Height 6.5 cm (based on finished candle)
Material Polycarbonate plastic
Required amount of wax About 170 grams
Maximum fragrance load percentage About 10%
Wax core Smokeless wax core No. 4, white cotton wax core No. 4
Please note
- This is a permanent plastic mold that can be reused multiple times.
- Do not use a hot air blower when cleaning the mold or removing wax as this may cause the mold to warp.
- The first time you use the mold, it is easy to release the wax from the mold using a release agent.
- Since the mold is separated from the top and bottom, a seam is created in the center of the candle. When finished, gently scrape the surface clean with a knife.
PC ball mold with smooth surface and just the right size
It is a round and simple small ball mold.
As an object, it is sized to fit anywhere and is a mold often used to create products for sale in classes.
This is a design that can be used in a variety of applications, with a sleek and clean spherical design.
This mold is a product designed and manufactured by Candleworks. Unauthorized copying is absolutely prohibited. Any violation may result in legal liability.
Point 1. Product composition
A PC mold with a diameter of 6.5 cm and a height of 6.5 cm (based on the finished candle).
A permanent plastic mold made of polycarbonate plastic that can be reused multiple times.
It takes approximately 170 grams of wax to make one candle.
Point 2. Neat spherical design
Smooth surface, cute size, can be combined with various candles, basic spherical design.
Because the mold construction is in two parts, the mold seam may show up as a thin line in the center of the finished candle.
Point 3. Homemade products
The Candleworks logo or wordmark is engraved on the edge of the mold or near the wax core line.
This product is a mold directly designed and manufactured by Candleworks. Unauthorized copying is strictly prohibited. If violated, you may be held legally responsible.
Point 4. Size comparison
You can check the dimensions by comparing them to similar shape types of spherical (round) and square candles based on the longest tapered mold.
PC small ball mold (6.5x6.5cm)
| Size | Diameter 6.5cm x height 6.5cm |
|---|---|
| Material | Polycarbonate plastic |
| Amount of wax required | About 170 grams |
| Maximum fragrance load | About 10% |
| Recommended wax core | No. 4 smokeless wax wick, No. 4 white cotton wax wick |
| Product Features |
- Permanent plastic mold that can be reused multiple times. |
How to use PC mold
How to use column mold
Production 1. Insert the wax core and block the entrance with the mold sealer
After inserting the wick into the wax wick hole, cover the wax wick hole with a Jacques mold sealer to prevent leakage of hot wax.
2. Spray release agent
Secure the wax core and spray release agent inside the mold. The release agent creates a thin lubricating film that helps the candle separate well from the mold.
Production 3. Melt wax
Melt wax according to mold size and capacity.
Production 4. Coloring
Use fat-soluble liquid dyes, color blocks, and pigment chips to create the desired color for your application.
Production 5. Mix sesame oil
Although the temperature varies depending on the wax, add the sesame oil between 80-85 degrees and stir evenly for about 1 minute.
Production 6. Wax pouring
Based on the wax for the column, pour the wax into the mold at a temperature of about 75~85℃.
Production 7. Fixing the wick
Using the wax wick clamp, gently pull on the wax wick and secure it in the center of the mold.
Production 8. Secondary pouring
When the surface of the wax hardens to a certain extent, use a glass rod to pierce the wax core around it, and pour the remaining wax into the blank space for the second time.
9. Remove the mold sealer
After the wax has completely hardened, remove the mold sealer before demoulding.
Production 10. Demold
After confirming that the mold has cooled, gently press the sides of the mold with your hands to create air gaps in the smaller shrinkage parts. Remove the candle from the mold and clean the wick.
